PDA

View Full Version : Kobold Quarterly Real Steel: Edge Geometry



PnP News Bot
12-14-2011, 12:10 PM
Originally posted on Wednesday 12-14-2011 12:00 PM at koboldquarterly.com (http://www.koboldquarterly.com)

http://www.koboldquarterly.com/k/wp-content/uploads/2011/12/grindtrio-300x214.jpg (http://www.koboldquarterly.com/k/wp-content/uploads/2011/12/grindtrio.jpg)There are three basic edge geometries used on cutting tools, and those three types have some variations. Each has advantages and disadvantages, and some are useful only on specialized tools. Each type has its advocates, and some makers like one type so much that they specialize in making only that type of edge.

The Hollow Grind

The hollow grind, or concave grind, is probably the most familiar; youíve probably at least heard of it, even if you donít know what it is. Itís created on a wheel, either on a stone or a belt grinderís contact wheel. Its primary advantages are extreme sharpness and the ability to approach a cut at a very acute angle and bite without sliding. Its biggest disadvantage is that it doesnít have much steel behind the edge, so itís fragile compared to other grinds. You have to be careful when initiating this grind to get it established at the same height on both sides of the blade. Once established, itís the easiest grind to finish because the grinder wheel wants to stay in the hollow thatís created. This grind is often used on fine cutting instruments, such as razors and scalpels.

The Convex Grind

http://www.koboldquarterly.com/k/wp-content/uploads/2011/12/grinds2.jpg (http://www.koboldquarterly.com/k/wp-content/uploads/2011/12/grinds2.jpg)The convex grind, also called the Moran grind or apple seed grind, is the geometric opposite of the hollow grind. Instead of having a hollow, it has a ďbelly.Ē Itís most easily created on the slack belt area on a belt grinder. Its biggest advantage is that it has a lot of steel behind the edge, so itís sturdy. Its biggest disadvantages are that itís difficult to make it extremely sharp (but itís not impossible), and itís the edge most difficult to initiate a cut at an acute angle without slipping. This grind is often used on hacking and chopping tools, such as axes, swords, and big knives. This is my favorite grind, and when itís done properly, in my opinion, itís the most versatile. Contrary to popular belief, this grind is capable of extreme sharpness, and I think itís the best grind for kitchen knives because the ďbellyĒ pushes the item being cut away from the blade, rather than letting it stick. I do this grind so itís almost flat. It took awhile to get it right, but I swear by it now.

The Flat Grind

The flat grind is generally considered to be a compromise between the other two types. It is easiest to make this grind on the flat platen (itís a flat metal, glass, or ceramic plate behind the belt that provides a hard flat surface to push against when grinding) of a belt grinder. Because itís a compromise, you can find this grind on almost any cutting instrument, but it is most often found on medium to large knives, such as camp knives and Bowies.

The Chisel Grind

The chisel grind is simply a ďhalf grindĒ; only one side of the blade is ground. It can be done in hollow, flat, or convex (a flat is shown), but the most common configuration is a hollow chisel. It is the most fragile type of edge, but the sharpest. Straight razors are often a hollow chisel grind. Chisel grinds are either left or right handed, which seriously limits its functionality. The name derives from chisels, which are ground this way to prevent the tool from plunging, as well as making them very sharp.

So Now You Know

I hope I didnít bore you too badly, but this is a pretty important topic if you want to understand edged tool construction.

Between weather and time I havenít been able to do another video, but weíll get to it soon.

Any questions?





Find this (http://www.koboldquarterly.com/k/front-page11400.php) and other great articles at koboldquarterly.com (http://www.koboldquarterly.com/).